Connect as user postgres to psql Create a hyperic admin account
postgres=# CREATE ROLE hypericadmin WITH login password 'owie983hf'; CREATE ROLE
Create the database
postgres=# CREATE DATABASE "HQ" owner hypericadmin; CREATE DATABASE
Change parameters in /var/lib/pgsql/data/postgresql.conf
##performance changes for HQ shared_buffers=10000 work_mem=2048 statement_timeout=30000
Modify listen_address in /var/lib/pgsql/data/postgresql.conf to listen on localhost
listen_addresses = 'localhost'
Add the password authentication method to pg_hba.conf, and deactivate IDENT method
# TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only #local all all ident sameuser # IPv4 local connections: #host all all 127.0.0.1/32 ident sameuser host all all 127.0.0.1/32 password # IPv6 local connections: #host all all ::1/128 ident sameuser
Test the connection using:
$ psql -U hypericadmin -h 127.0.0.1 -p 5432 -d 'HQ' -W
Create a hyperic user
$ sudo /usr/sbin/useradd -d /opt/hyperic-server/ -m -r -s /bin/bash hyperic
Untar the server components into /opt/hyperic-server/
$ sudo su hyperic $ cd /opt/hyperic-server/ $ tar -xzvf /home/jvehent/hyperic/hyperic-hq-installer-4.5-x86-64-linux.tar.gz $ ls hyperic-hq-installer-4.5
Launch the installation script with the -postgresql option to prompt for pgsql parameters:
$ ./hyperic-hq-installer-4.5/setup.sh -postgresql Unpacking JRE to temporary directory /tmp/jre Please ignore references to missing tools.jar Unable to locate tools.jar. Expected to find it in /tmp/lib/tools.jar Loading taskdefs... Taskdefs loaded Initializing Hyperic HQ 4.5 Installation... Choose which software to install: 1: Hyperic HQ Server 2: Hyperic HQ Agent You may enter multiple choices, separated by commas. 1 HQ server installation path [default '/home/hyperic']: /opt/hyperic-server/ Enter the JDBC connection URL for the PostgreSQL database [default 'jdbc:postgresql://localhost:5432/HQ?protocolVersion=2']: jdbc:postgresql://localhost:5432/HQ?protocolVersion=2 Enter the username to use to connect to the database: hypericadmin Enter the password to use to connect to the database.: (again): Enter an encryption key to use to encrypt the database password.: fwieifwihfwhwi Loading install configuration... Install configuration loaded. Preparing to install... Validating server install configuration... Checking server webapp port... Checking server secure webapp port... Checking database permissions... Verifying admin user properties Validating server DB configuration... Installing the server... Unpacking server to: /opt/hyperic-server/... Creating server configuration files... Copying binaries and libraries to server installation... Copying server configuration file... Copying server db-upgrade files... Copying server libs... Setting up server database... Loading taskdefs... Taskdefs loaded Installing the server JRE ... Unpacking JRE amd64-linux-1.6.tar.gz to: /opt/hyperic-server//server-4.5... Setting permissions on server binaries... Fixing line endings on text files... -------------------------------------------------------------------------------- Installation Complete: Server successfully installed to: /opt/hyperic-server//server-4.5 -------------------------------------------------------------------------------- You can now start your HQ server by running this command: /opt/hyperic-server/server-4.5/bin/hq-server.sh start Note that the first time the HQ server starts up it may take several minutes to initialize. Subsequent startups will be much faster. Once the HQ server reports that it has successfully started, you can log in to your HQ server at: http://ip-10-112-54-178.ec2.internal:7080/ username: hqadmin password: hqadmin To change your password, log in to the HQ server, click the "Administration" link, choose "List Users", then click on the "hqadmin" user. Setup completed. A copy of the output shown above has been saved to: /opt/hyperic-server/hyperic-hq-installer-4.5/installer/logs/hq-install.log Deleting temporary JRE
Create a hyperic user on the node to monitor, and untar the agent file into /opt/hyperic-client/
$ sudo useradd -d /opt/hyperic-client/ -m -r hyperic $ sudo su hyperic $ cd ~ $ tar -xzvf hyperic-hq-agent-4.5-x86-64-linux.tar.gz
Start the Agent, the startup process will prompt for the configuration parameters:
$ /opt/hyperic-client/hyperic-hq-agent-4.5/bin/hq-agent.sh start Starting HQ Agent... [ Running agent setup ] What is the HQ server IP address: 1.2.3.4 Should Agent communications to HQ always be secure [default=no]: What is the HQ server port [default=7080]: - Testing insecure connection ... Success What is your HQ login [default=hqadmin]: hqadmin What is your HQ password: What IP should HQ use to contact the agent [default=5.6.7.8]: What port should HQ use to contact the agent [default=2144]: - Received temporary auth token from agent - Registering agent with HQ - HQ gave us the following agent token 1300119383055-3043578642620364530-5152087890925512228 - Informing agent of new HQ server - Validating - Successfully setup agent
The same parameters can be kept in a static file, in /opt/hyperic-client/hyperic-hq-agent-4.5/conf/agent.properties
# HQ Server address and port (clean / ssl) agent.setup.camIP=1.2.3.4 agent.setup.camPort=7080 agent.setup.camSSLPort=7443 agent.setup.camSecure=yes agent.setup.camLogin=hqadmin agent.setup.camPword=secretpassword agent.setup.agentIP=5.6.7.8 agent.setup.agentPort=2144 agent.setup.resetupTokens=no
JVM monitoring is done using a plugin. You first need to discover the path of the JAVA installation, using the parameters:
## auto discover sun jvm jmx.sun.discover=true
in agent.properties. Then restart the agent and launch a discovery from the web interface. It should find the JVM (if you provide the proper location).
Then, you can connect to the JMX console using the JMX plugin. Modify the configuration of the plugin in hyperic-hq-agent-4.5/bundles/agent-4.5/pdk/plugins/jmx-plugin.xml and change the port of the JMX console:
<plugin name="jmx" package="org.hyperic.hq.product.jmx"> <classpath> <include name="pdk/lib/mx4j"/> </classpath> <config name="jmx" type="global"> <option name="jmx.url" description="JMX URL to MBeanServer" default="service:jmx:rmi:///jndi/rmi://localhost:8998/jmxrmi"/>
Restart the agent again and, from the interface, go to the inventory of the JVM. Remove the username and password if any, and you should be able to list the ressources exposed by the JMX console.